SPEAKERS
06TH EDITION HIGHLIGHTS: SPEAKERS

Prof. Jianhua Hao
The Hong Kong Polytechnic University
Hong Kong
Group-V elemental 2D van der Waals heterostructure for field-effect transistor

Prof. Rabah Boukherroub
University of Lille, CNRS
France
Turning waste polymers into added-value materials and fuels

Prof. Paul Lecoq
European Organization for Nuclear Research (CERN)
Switzerland
Metascintillators for medical imaging applications

Dr. Thomas Walther
The University of Sheffield
United Kingdom
Transmission electron microscopy for the characterization of semiconductor nanostructures

Prof. Andreas Wieck
Ruhr University Bochum
Germany
Optimization and localization of molecular-beam-epitaxy-grown InGaAs quantum dots

Prof. Enrique San Andres
Complutense University of Madrid
Spain
High pressure sputtering as an alternative technology for the fabrication of novel architectures of solar cells

Prof. Nicolas Fourches
CEA-University Paris-Saclay
France
The DoTPiX project: Technological and material science implications

Dr. Sepideh Akhbarifar
The Catholic University of America -Vitreous State Lab
United States
Thermal transport anomalies and metal-insulator transition in some ruthenate pyrochlores

Prof. Hossein Ali Khonakdar
Iran Polymer & Petrochemical Institute
Iran
In-depth analysis of thermal and mechanical properties of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends in presence of nanosilica: A combined theoretical and experimental approach

Prof. Wenbo Peng
Xi'an Jiaotong University
China
Piezo-phototronic effect in multi-layer structured optoelectronic: Bilateral piezoelectric charge modulation

Prof. Zhong Lin Wang
Beijing Institute of Nanoenergy and Nanosystems, China | Georgia Institute of Technology
United States
Triboelectric nanogenerators for sustainable energy and systems

Prof. Zhen Li
Wuhan University
China
From single molecule to molecular aggregates

Prof. Carmen Cepeda-Jiménez
National Centre for Metallurgical Research (CENIM-CSIC)
Spain
Mechanical properties and thermal stability of high-strength AlFeCrX aluminium alloys developed for laser-powder bed fusion

Prof. Chad Ulven
North Dakota State University
United States
Light-assisted 3D printing of continuous carbon fiber reinforced thermoset composites

Prof. Xueyu Li
Hokkaido University
Japan
Fatigue resistance of tough hydrogels affected by phase-separated structures

Prof. Guy Pluvinage
University of Lorraine
France
Risks associated with hydrogen and ammoniac used as energy vector

Prof. Wagner A. Alves
Federal University of Juiz de Fora
Brazil
Vibrational spectroscopic information on the electroactive solvates in Mg battery electrolytes

Prof. Olivier Bonnaud
University of Rennes & GIP-CNFM
France
Technological and human roles in micro-nanoelectronics field on energy consumption and sustainability

Prof. Zacharoula Iatridi
University of Patras
Greece
Heterograft copolymers based on sodium alginate and N–isopropylacrylamide: Effect of pH on the thermo–induced rheological properties

Prof. Omar Chaalal
Abu Dhabi University
United Arab Emirates
Global green solution for global warming

Prof. Ana Luisa Daniel-da-Silva
University of Aveiro
Portugal
Multifunctional colloidal bionanocomposites for water treatment and quality monitoring

Prof. Bernd Szyszka
Technische Universität Berlin
Germany
Hollow cathode co-sputtering of dielectric and active semiconductive oxide films for catalysis and transparent electronics

Prof. Yaohui Liu
Technological and Higher Education Institute of Hong Kong
Hong Kong
Study of filtering efficiency and biodegradability of air filtering membranes prepared by electrospinning using polyhydroxyalkanoates with various ratios of 3-hydroxybutyrate to 3-hydroxyvalerate

Prof. Ching-Sung Lee
Feng Chia University
Taiwan
Novel In0.1Al0.8Ga0.1N/GaN MOS-HFETs with (Al0.7Ga0.3)2O3 gate dielectric

Prof. Jose Pedro Rino
Universidade Federal de Sao Carlos
Brazil
Dynamics of crystal Growth in supercooled BaS semiconductor

Dr. Ottavia Jedrkiewicz
Istituto di Fotonica e Nanotecnologie, CNR
Italy
Tailored fabrication of graphitic microelectrodes in diamond by pulsed Bessel beams

Prof. Slawomir Pawel Lepkowski
Institute of High Pressure Physics, Polish Academy of Sciences
Poland
Polarization-induced topological insulator in ultra-thin InN/InGaN coupled quantum wells

Dr. Tetjana Tomaskova
University of West Bohemia
Czech Republic
New possibilities for optimizing epoxy resin parameters by adding of aluminum oxide nanoparticles

Prof. Adam Rycerz
Jagiellonian University
Poland
Quantum transport of Dirac fermions in selected graphene nanosystems away from the charge-neutrality point

Prof. Toyo Kazu Yamada
Chiba University
Japan
Smallest molecular machine: Sliding motion in ammonium-linked ferrocene

Dr. Catherine Debiemme-Chouvy
LISE, Sorbonne université, CNRS
France
Nanostructured conductive polymer films synthetized by a one-step templateless electrochemical route, in an aqueous solution

Prof. Zidan Wang
Chair of Physics | Head | Director, The University of Hong Kong | Council Chairman and President of the Hong Kong Physical Society
Hong Kong
Non-Hermitian topological materials and beyond

Prof. Mounim Lebrini
University of the Antilles
France
Assessment of chlordecone (CLD) contamination and bioaccumulation in diadema antillarum in Martinique: Comparison of extraction methods and detection of degradation products

Prof. Man Shing Wong
Associate Director, Institute of Advanced Materials, Hong Kong Baptist University
Hong Kong
Amyloid-β targeted theranostic fluorescent probe for detection and monitoring of reactive oxygen species in Alzheimer disease

Prof. Lakhdar Taleb
Head of Research Laboratory at the National Institute of Applied Sciences Rouen Normandy
France
Experimental and numerical analyses of transformation induced plasticity in ferritic steels

Prof. Yuezhong Meng
Chair Professor; Dean, Sun Yat-sen University
China
Biodegradable function materials synthesized from carbon dioxide: Theory, commercialization and applications

Dr. Guohai Chen
National Institute of Advanced Industrial Science and Technology (AIST)
Japan
Advanced synthesis of highly crystalline carbon nanotubes and high aspect ratio arrays with application demonstrations

Dr. Annamaria Naughton-Duszova
Institute of Materials Research, Slovak Academy of Sciences
Slovakia
Wear characteristics of dual-phase high-entropy ceramics prepared by two different processing routes

Dr. Robert Guidoin
Laval University
Canada
Xenopericardia for percutaneous aortic valve engineering: The anticipated benefits of fractal analyses